Publications

Advancements from GML

A simple design rule for variable thickness shell based architected materials with improved stiffness

Mechanics of Materials

A general fabrication approach for rapid prototyping of ceramic oxygen separation membranes ranging from microtubes to hollow fibers

Journal of Membrane Science
A general fabrication approach for rapid prototyping of ceramic oxygen separation membranes ranging from microtubes to hollow fibers

Microstructural analysis and defect characterization of additively manufactured AA6061 aluminum alloy via laser powder bed fusion

Journal of Materials Science & Technology
Microstructural analysis and defect characterization of additively manufactured AA6061 aluminum alloy via laser powder bed fusion

On the microstructure evolution of AA6061 with pulsed laser powder bed fusion

Materials Research Letters
On the microstructure evolution of AA6061 with pulsed laser powder bed fusion

Enhancing mortar composite matrices with three-dimensional auxetic truss lattice materials for reinforced concrete structures

Construction and Building Materials
Enhancing mortar composite matrices with three-dimensional auxetic truss lattice materials for reinforced concrete structures

Better than linear strength scaling of multifunctional ceramic truss lattice materials

International Journal of Mechanical Sciences
Better than linear strength scaling of multifunctional ceramic truss lattice materials

Warren truss inspired hierarchical beams for three dimensional hierarchical truss lattice materials

Mechanics of Materials
Warren truss inspired hierarchical beams for three dimensional hierarchical truss lattice materials

Mechanical response and failure modes of three-dimensional auxetic re-entrant LPBF-manufactured steel truss lattice materials

Journal of Applied Mechanics
Mechanical response and failure modes of three-dimensional auxetic re-entrant LPBF-manufactured steel truss lattice materials

A Fully 3D-Printed Flexible Polymeric Heat Pipe

Journal of Thermal Science and Engineering Applications
A Fully 3D-Printed Flexible Polymeric Heat Pipe

An experimental process parameter study on the identification of defects in additively fabricated Al6061 with laser powder bed fusion

Materials Science in Additive Manufacturing

Characterization of defects in additively manufactured materials from mechanical properties

Materials Science and Engineering: A
Characterization of defects in additively manufactured materials from mechanical properties

Auxetic boosting of confinement in mortar by 3D reentrant truss lattices for next generation steel reinforced concrete members

Extreme Mechanics Letters
Auxetic boosting of confinement in mortar by 3D reentrant truss lattices for next generation steel reinforced concrete members

Postbuckling behavior and imperfection sensitivity of elastic–plastic periodic plate-lattice materials

Extreme Mechanics Letters
Postbuckling behavior and imperfection sensitivity of elastic–plastic periodic plate-lattice materials

Optimal turbine blade design enabled by auxetic honeycomb

Smart Materials and Structures
Optimal turbine blade design enabled by auxetic honeycomb

Harnessing Viscous Flow to Simplify the Actuation of Fluidic Soft Robots

Soft robotics

Additive manufacturing of nanostructures that are delicate, complex, and smaller than ever

Small

Application of multifunctional mechanical metamaterials

Advanced Engineering Materials

Correlation between topology and elastic properties of imperfect truss-lattice materials

Journal of the Mechanics and Physics of Solids
Correlation between topology and elastic properties of imperfect truss-lattice materials

On the deformation and failure of Al 6061-T6 in plane strain tension evaluated through in situ microscopy

International Journal of Fracture
On the deformation and failure of Al 6061-T6 in plane strain tension evaluated through in situ microscopy

The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading

International Journal of Fracture
The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading

Prediction of ductile failure in Ti–6Al–4V using a local strain-to-failure criterion

International Journal of Fracture
Prediction of ductile failure in Ti–6Al–4V using a local strain-to-failure criterion

On the deformation and failure of Al 6061-T6 at low triaxiality evaluated through in situ microscopy

International Journal of Fracture
On the deformation and failure of Al 6061-T6 at low triaxiality evaluated through in situ microscopy

Characterization of waviness in wind turbine blades using air coupled ultrasonics

AIP Conference Proceedings